Find all private IP address search results here192.168.156.1. If you are trying to figure out how to log into your Internet router, modem, extender or wireless access point, you can access the embedded HTML web page by clicking on the link belowhttpohttps.
The most commonly used default username and password to access the admin interface is "admin" or "setup". For a TP Link, Netgear or D-Link (or Wi-Fi) wireless router, you can also find the default settings on the back of the device. If that doesn't work, you can reset the router. To do this, you need to hold the reset button for about 10 seconds. This will restore factory settings and you will be able to log in with the information provided on the tag.
The IP address 192.168.156.1 is registered by the Internet Assigned Numbers Authority (IANA) as part of a private network192.168.156.0/24.
IP addresses in the private domain are not assigned to any specific organization, including your ISP (Internet Service Provider), and anyone can use these IP addresses without the consent of a Regional Internet Registrar, as described in RFC 1918, by unlike public IP addresses. .
However, IP packets addressed by a private scope cannot be sent over the public internet. So if that private network needs to connect to the internet, it must do so through a gateway or NAT proxy server (also known as NAT) (usually reachable on port 8080 or 8081 if that doesn't work directly ).
An example of a NAT gateway would be a wired or wireless router obtained from a broadband provider. A gateway web interface must be available via HTTP (Hypertext Transfer Protocol) and/or HTTPS (Hypertext Transfer Protocol Secure) protocols. To test this, you must enter'http://ip-address'o'https://ip-address'in the address bar of your preferred browser, such as Google Chrome or Mozilla Firefox, and sign in with the username and password provided by your ISP.
You can use these types of IP (private network) addresses on your local network and assign them to your devices such as PCs, laptops, tablets and/or smartphones. You can also configure a scope on a Dynamic Host Configuration Protocol (DHCP) server to automatically assign IP addresses.
Technical details
| IP address | 192.168.156.1 |
| Type of address | Private |
| protocol version | IPv4 |
| network class | Class C |
| conversions | 3232275457 (decimal/nose) c0a89c01 (Hex / Base 16) 1921681561 (numeric) |
| DNS inverso | 1.156.168.192.in-adr.arpa |
| CIDR block | 192.168.156.0/24 |
| network reach | 192.168.156.0-192.168.156.255 |
| network id | 192.168.156.0 |
| issue address | 192.168.156.255 |
Login to admin panel at 192.168.156.1
So, you've read the label on the back of your router and know exactly what the address should be, but have no idea how to proceed? No problem. We'll help you gain access. Just follow our 4 easy steps1 Open your favorite web browser on your computer, which can be a PC or a laptop, but not normally on a mobile phone. We recommend that you first make sure you are using the latest browser version. If necessary, update your browser to avoid compatibility issues with the router's interface.
2 Enter the following into your browser's address bar:https://192.168.156.1
or if that doesn't work you can try:http://192.168.156.1
Do not use "www" anywhere. This is not necessary to access a router.
3 If all goes well, a web interface will appear. The credentials you need to use here are also printed on the back of the device. if you can't try"Administrator".for username and password. You can also check out the list of common usernames and passwords below.
4 After accessing your device, it's important to remember to change your password to a custom password. Leaving the default settings is bad practice and can pose a serious security risk that could even get you hacked. Have in mind!
Default router username and password
To make it easier for you to access your router's login page, we've compiled a list of factory default usernames and passwords from popular network brands to help you out. Check the label on the back of your device to determine which manufacturer you are using.| Manufacturer | user name | password |
|---|---|---|
| belkin | Administrator | password |
| buffalo | Administrator | password |
| link d | Administrator | file |
| DD-WRT | source | Administrator |
| Draytek | Administrator | Administrator |
| Linksys | file | Administrator |
| Netgear | Administrator | password |
| motorola | Administrator | motorola |
| Sitecom | Administrator | Administrator |
| Enlace TP | Administrator | Administrator |
| Zyxel | Administrator | 1234 |
Public and private IP addresses
As you may have noticed, we've talked a lot about public and private IP addresses, but what are they and what's the difference between them?He looked up 192.168.156.1, which is aprivate ip addressand probably related to your ownWi Fi Red. It is a combination of four numbers, called octets, separated by dots, which can be used to access your router's administration page. And since your router acts as a bridge between your local network and the internet, it also has a different IP known as a public IP address. The public IP address is assigned by your ISP and is effectively out of your control.
Hepublic IP addressIt has the same structure, it is also composed of four digits separated by dots, but they cannot be identical to those of a private address. It is used to connect your network to the outside world and tocommunicate as internet. Whenever you visit a website or send an email, your router receives it over its private network and sends the information over its public interface.
Another difference is that the public IP addresses assigned by ISPs are likely to change, as every router in the world needs a unique public IP address, basically like people and their home address, so ISPs tend to use IP addresses. to do. Due to the limited number of addresses available, you won't need more than you need. They do this based on a query. When you disconnect your router from the Internet, the IP address is revoked and given to the next logged in user.
It's also common to have a static public IP address that doesn't change regularly like a dynamic address. Today, the servers that power websites and email, located in data centers around the world and often referred to as the "cloud", are almost strictly prohibited from doing so. This makes sense as these servers need to be available 24/7.
The main disadvantage of a public IP address is that it faces outward and can reveal details such as a rough estimate of the user's location, as you can also see on this site. wearing avpn, like the ones we offer on our Hide my IP service, can give you some peace of mind if you don't like the idea of being "outdoor" while surfing the web. Since it's another layer on top of your network, it hides your public IP address from the internet by giving you a random address. It is even possible to completely obfuscate your physical location.
Today you can buy routers with this option built in, but the most common way to do this is to install an app on your computer or phone.